Description
Alligator shears Q43 -2500 Wanshida
Alligator shear Q43-2500 used for the production of the charge of scrap metal of various shapes and cold cutting of structural metal, including steel, of circular cross-section, square steel section, iron angles, steel beam, steel sheet, steel pipes etc., are Usually used in factories for metal processing, metallurgical plants, plants for recycling of scrap metal and so on. If there is no power supply in place, the equipment can operate from a diesel engine.
The main advantages of alligator shears is the balance and stability of transmission, stable speed. The machine has a push-button control, and allows automatic cutting with manual feed. It is popular among customers from Russia and Ukraine, who over the past two years have purchased about 300 sets of equipment.
| № | Parameters | ||||
|---|---|---|---|---|---|
| 1 | Cutting cylinder | Type | YG250/160-540 | Tact | 540 mm |
| rated thrust | 2500 kN | Quantity | 1 PC. | ||
| 2 | Clamping cylinder | Type | YG125/90-347 | Tact | 347 mm |
| rated thrust | 260 kN | Quantity | 1 PC. | ||
| 3 | Oil pump | Model | 80YCY14-1B | nominal pressure | 31.5 MPa |
| flow Characteristic | 80ml/vol | Quantity | 2 PCs. | ||
| 4 | Engine | Model | Y180M-4 | rated speed | 1460ob/min |
| Power | 18.5 kW | Quantity | 2 PCs. | ||
| 5 | hydraulic system Operating pressure | 25 MPa (Maximum pressure 27 MPa) | |||
| 6 | fuel tank Capacity | 2160 l | |||
| 7 | blade Length | 1200 mm | |||
| 9 | the main Dimensions of the molded materials | Common steel | |||
| 10 | cutting Frequency | 6-8 times/min | |||
| 11 | Maximum blade opening | 450 mm | |||
| 12 | External dimensions | 2650мм×1024мм×1880мм | |||
| 13 | Total power | 18.5×2 + 9 kW | |||
| 14 | Weight | 9.5 tons |
